FRANK RUSTECH WD 1908

INTRODUCTION :
Frank Rust Tech 1908 is soft film, solvent deposited, water displacing type, corrosion preventives. These fluids can be applied directly to water wet metal surfaces, where they displace water, leaving a protective film. All these fluids have excellent spreading and they can be applied either by dipping or by spraying. The protective films of all these grades can be removed by wiping off with rags/waster soaked in kerosene/mineral turpentine or by alkaline degreasents or by solvent degreasing methods.

APPLICATION :
Frank Rust Tech 1908 is efficient dewatering fluid leaves a very thin oily film with little protective properties. It is used on non-ferrous metals like aluminium, aluminium alloys and brass, to displace water and prevent tarnishing. Its thin oily film can be easily removed by wiping.

TYPICAL PROPERTIES :
The typical figures for Frank Rust Tech 1908 are given in the Characteristics table.

Frank Rust Tech 1908 : TYPICAL PROPERTIES

These are typical figures and do not constitute a specification.